ESP WROOM 32 MCU Module

Product Description

This is ESP WROOM 32 MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.

At the core of this module is the ESP32S chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MHz.

The user may also power off the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32S integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C.

Using Bluetooth, users can connect to their phone or broadcast low energy beacons for its detection. The use of Wi-Fi enables a large physical range, as well as a direct connection to the internet via a Wi-Fi router. Perfect for wearable electronic or battery-powered applications, the ESP32 chip uses less than 5µA.

In addition, this module can support data rates of up to 150 Mbps and 22 dBm output power at the PA in order to allow for the widest physical range.

Features 

• Clock Speed:             160MHz
• USB Converter:        CP2102
• USB Connector:       Micro USB
• Flash Memory:         4 MB
• RAM:                          512Kb
• Digital I/O:                32 (26 usable)
• PWM:                          16 channels
• Analog Outputs:        2 channels, 8-bit
• Analog Inputs:          16 channels, 12-bit
• Communications:     3 Serial, 4 SPI,  2 I2C, CAN bus, I2S Stereo
• Integrated Sensors: IR remote, Hall sensor, temperature sensor, touch sensors, pulse counter
• Bluetooth:                  4.2 and BLE (Bluetooth Low Energy)
• WiFi:                           Built-in 802.11 b/g/n  2.4GHz
• Buttons:                      EN (Reset) and IO0 (Boot)
• Programming:          Compatible with Arduino IDE
• Pin Spacing:              0.1″ centers.  Breadboard compatible
• Operating Voltage:   3.3V internal power and I/O.

Package Includes

• 1 x ESP WROOM 32 MCU Module